wear resistant ceramic adhesiv > high temperature epoxy hardener curing agent

high temperature epoxy hardener curing agent

BD11 high temperature epoxy hardener curing agent

Product performance feature:
1. With low viscosity.
2. The adhesion of the adhesive layer is strong, the cohesive strength is high,toughness and close-grained.
3. After mixing with universal epoxy E-51,the heat resistant can reach to more than 250 deg C.BD11 is the modified aromatic amines
high temperature resistant curing agent,can be curing into common bisphenol A epoxy resin at room temperature,the heat resistant of the
cured products after heating up curing of common bisphenol A epoxy resin can reach to 250 deg C,the strength of the cured products is high,
the bonding force is good, usage period is long.

How to use:
The mixing weight ratio:E-51: BD11 = 100 : 25
The mixing weight ratio E-44: BD11 = 100 : 22
Curing:Surface drying time: 1 hour,initial curing time: 4 hours (at room temperature of 25 deg C),

Packaging,transportation and storage:
This product can be packed in iron drum or plastic drum,the net weight of each drum is 20 Kgs or 200 Kgs.
In the process of transportation,it is strictly forbidden to open cover and package damage, pay attention to moistureproof,
avoid sunshine and rain.
This product should be stored in a cool and dry warehouse,the storage period is 12 months.
Exceed the time limit,after passing inspection,it can still be used.

The product performance index of BD11 high temperature resistant epoxy curing agent:

Appearance	Viscosity (25℃) mPa.s Test method:NDJ-1 rotational viscometer,number 4 rotor,6rpm	Density(25℃) g/cm3	freezing point (℃)	amine value mkoh/g	Toxicity LD
Amber Liquid	6000±1000	1.06±0.05	< -14	380-440	> 5000

The product packaging photo of BD11 high temperature resistant epoxy hardener curing agent:

------分隔线----------------------------